Contrast and Comparisons between The Colour Purple and I...

In Maya Angelou’s I Know Why the Caged Bird Sings and Alice Walker’s The Color Purple, important aspects of the African American women’s experience in America in the early/mid. 1900’s are discussed such as the physical abuse and emotional abuse they endured and their social standing in society. In both novels you are able to witness the anguish and persecution that these women had to undergo. Maya from I Know Why the Caged Bird Sings and Celie from The Color Purple are the main characters and we see that they are both differentiated against during their journeys of life. Men in their lives take advantage of both women and they are used for sexual pleasure, and as slaves. They are not treated fairly as they should be and people in their†¦show more content†¦The book The Color Purple has been called that name for certain reasons. Shanyn Fiske writes in Piecing The Patchwork Self: A Reading Of Walker s The Color Purple, The color purple is continuall y equated with suffering and pain. Sophia s swollen, beaten face is described as the color of eggplant . Purple is the color of Celie s private parts: the site of her sexual violation. (Fiske, 153) Since the average African American woman got beaten almost to death, and was sexually assaulted until they were not even recognizable, the novel’s name fits it quite well. Fiske tells us that the colour purple describes what Sophia and Celie looked like after they had been beaten and sexually abused so many times by the men in their lives. The Color Purple was a story that resembled Oprah Winfrey’s life as well. Oprah was â€Å"raped as a child, but there was more to come. She would be molested and raped, repeatedly, through early adolescence, by other grown men, including the boyfriend of a cousin who was living with Oprah s mother, and by her favorite uncle. ‘It was just an on- going, continuous thing,’ she has said; ‘I started to think This is the way life is. ’† (Flanagan) Oprah, along with many other African American women, began to think that it was normal for men to be abusing them in such a manner, which is not the truth at all. Some of these poor women did not know what was

Charismatic style of Leadership Free Essays

I have chosen the leader of a local foundation in our community who had been in the public eye due to his tireless efforts and initiative in addressing the homeless problem that are common even in suburban America. The person exhibits all three characteristics which include firstly, charm and grace, a primary characteristic of charismatic type of leadership. Secondly, the leader has the ability to command respect because he has immense self-belief that he can accomplish a lot for the homeless people. We will write a custom essay sample on Charismatic style of Leadership or any similar topic only for you Order Now Thirdly, this person or leader has been influential as well because he can draw people in the upper echelon of society to support in many aspects of their program. People, both within the volunteer and paid staff, the homeless themselves and the supporters respect, abide by and pursue this leader’s vision and plans because they see firsthand his transparency and personally admire or have a high regard for his manner of dealing with the staff. This is what is called intense â€Å"attraction† to a leader because of his/her ability to command respect, conduct with such verve and energy (â€Å"Charismatic Leadership, 2007). When they hold meetings or when this leader speaks to people, he sees everyone in the room, and seems to convey at a level of â€Å"closeness.† The leader picks at the moods and behavior of the moment and then tailors what he is going to do next based on those observations. The leader employs different methods or strategies to get the attention of the followers, is very persuasive and very effective in using gestures and body language (â€Å"Charismatic Leadership, 2007). When this person leads his team, he tries to create a distinction about his group in contrast with that of others. He builds the uniqueness of the group in the eyes of members and makes efforts to solidify the group’s adherence to the leader but the members expect as well of their leader’s loyalty towards them. He exhibits leadership skills coupled with a positive outlook and is other –oriented which results to changes for the good of the team usually (â€Å"Charismatic Leadership, 2007). Reference: _________ â€Å"Charismatic Leadership†. 2007. Changing minds.org. Accessed March 24, 2008 http://changingminds.org/disciplines/leadership/styles/leadership_styles.htm How to cite Charismatic style of Leadership, Essay examples

Protestant Ethics Of Webber Essays - Historical School Of Economics

Protestant Ethics of Webber Max Weber's original theory on the rise of Capitalism in Western Europe has been an often studied theory. In its relationship to Protestantism, specifically Calvinism, Weber's theory has been in scholarly debate since it's release in 1904. "The Protestant Ethic and the Spirit of Capitalism" puts forth not capitalism as an institute, but as the precursor to the historical origins of capitalism. Weber's attempts to use statistical data, as well as church doctrine to prove his theory, has been the foundation for the main arena of debate amongst his peers. Weber, although touching on other religions and countries, specifically focuses on the Reformation and its correlation to the dominance of capitalism in Western civilizations. He centers his work on the thesis ?that the chances of overcoming traditionalism are greatest on account of the religious upbringing', thus ?it is worthwhile to ask how this connection of adaptability to capitalism with religious factors occurred in the early days of capitalism(1).' This break with tradition could be attributed to the ?calling' as depicted in the Protestant faith. Weber believes Protestants saw the ?calling' as finally sanctifying the earning of a profit and as a sign of salvation. In this, he saw a breaking of the ?backward-sloping supply curve' for labor by instilling a new work ethic and the bringing forth of capitalistic values. Amintore Fanfani in his critical work "Catholicism, Protestantism, and Capitalism" disagrees with Weber on the role Protestantism played in the development of capitalism. He argues that "Europe was acquainted with capitalism before the Protestant revolt" and thus "...we have ruled out that Protestantism could have produced a phenomenon that already existed(2)." He does agree that capitalism acquired prominence after the Reformation; however, he attributes the success to Italian merchants who operated under Catholicism decades earlier. Fanfani believes this discredits the influential aspects of religion on capitalism, and instead credits "that general revolution of thought that characterizes the period of the Renaissance and the Reformation, by which in art, philosophy, morals, and economy, the individual emancipates...himself from the bonds imposed on him during the Middle Ages(2)." Arguments could be made on Weber's behalf that it was the Reformation that ?emancipated' Protestants f rom the bonds of Catholic ritual. The removal of the Catholic priest necessitated Protestants to acquire a higher degree of learning for their own salvation. An education combined with divine sanction towards profit and a sinful attitude towards idleness would only lead towards a diligent work ethic. It can be inferred, in this rebuttal, that the Reformation may have been a guiding factor in the Renaissance and therefore Fanfani's argument would be inclusive of Weber's theory. The argument that capitalism existed before the Reformation is valid, but Fanfani is discussing it as a definition where as Weber discusses it as driving force. Weber's thoughts, that rationality being a basis for capitalism, inspired him to use several quotes from Ben Franklin early in his work. In where, even before there was a strong capitalistic foundation formed in the colonies, Weber found Franklin's writings to be infused with the prudence of rationality. From Franklin's work "Necessary Hints to Those That Would be Rich" Weber quotes: For six pounds a year you may have the use of one hundred pounds, provided you are a man of known prudence and honesty... He that loses five shillings, not only loses that sum, but all the advantages that might be made by turning it in dealing, which by the time that a young man becomes old, will amount of a considerable amount of money(3). Weber's critiques Dickson and McLachlan deny that Franklin is preaching a Protestant work ethic, and suggest that by the title of Franklin's work he is merely suggesting prudent advise. Yet, it is that prudent advise that fits neatly into Weber's definition of capitalism in where he states that ?one which rests on the expectation of profit by the utilization of opportunities for exchange, that is on peaceful chances of profit... and pursuit of profit and forever renewed profits through continuous, rational, capitalistic enterprise(1).' Dickson and McLachlan, like many other critiques, don't take into account that although Weber attempts to prove a statistical and specific point as to the origin of capitalism, it's a generalization he refers to.

Electronics The WritePass Journal

Electronics Introduction Electronics IntroductionTASK 1: THE 555 TIMER IC.MODES: ASTABLE MODE:MONOSTABLE MODE:BISTABLE MODE:OPERATION:TASK 2:  INTRODUCTION OF FET TRANSISTOR:CONSTRUCTION AND OPERATION OF FETDEPLETION MODE:THE ENHANCEMENT MODE MOSFET:COMAPRISON BETWEEN MOSFET AND BJT:ADVANTAGE OF MOSFET DEVICE:DISADVANTAGE OF MOSFET DEVICE:   USES OF MOSFETs:REFERENCES:Related Introduction In this assignment I would try my level best to fulfill all the condition of the given tasks. I would concern figure of things while attempting the assignment. Firstly, the referencing and the bibliography should be updated timely because it will help me keep in mind where I have got the materials from. Secondly I would try to complete my assignment under the chosen time limit which is very vital. Thirdly all the given tasks should be completed with appropriate information and try to stay within the word count. Lastly, I would try to present my work with clarity and rationality so my hard work should be understood in best possible manner TASK 1: THE 555 TIMER IC. 1a) Before 555 timer came to the market there were large distinct circuits used to carry out the operation of a timer but the compatibility and numerous other advantages of a 555 timer lead the breakthrough .The 555 timer is an integrated circuit designed by Hans R. Camenzind and commercialized by that times leading semiconductors manufacturer signetics. It’s mainly used in variety for timing purposes, producing perfect timing periods through a vast range of time and as a multi vibrator and due to the versatility of the IC it has made conspicuous place in the history of electronics. Never thought by its maker to be so flexible the 555 package consists of numerous transistors, diodes and resistors (depending on the purposes) imbedded on a silicon chip and connected to an 8-pin dual in line package. (D C Green, Electronics 4, third edition, 1995, Longman Scientific and technical) The single 555 timer chip in its basic form is a 8 pin chip consisting of 20 transistors, 2 diodes, 15 resistors. (electronics-tutorials.ws/waveforms/555_timer.html )feb 10, 2011 Above shown fig shows 8 pins which are labeled to show there function. Below is the more detailed function of these pins. Pin no. 1: It is connected to GROUND which connects the 555 timer to the negative 0v supply rail. Pin no. 2: It is the trigger pin. A negative pulse on this pin â€Å"sets† internal flip-flop and start up a timing cycle. Pin no. 3: is an output pin of the 555 timer, it can be connected directly to the inputs of other digital IC’S with the required voltage. Pin no. 4: is the RESET pin which is used to reset the internal flip-flop controlling the output. In other words to terminate the timing cycle. Pin no. 5: is a control voltage pin which can be used to alter the timing aspect of the 555 IC in applications such as frequency modulation. Pin no. 6: is the threshold pin which donates the duration of the timer to ‘output voltage in each of the on/off cycle’ this time phase end when voltage at threshold becomes higher than control voltage pin. Pin no. 7: is a discharge pin which is connected directly to the internal transistor which is used to discharge the timing capacitor to ground. Pin no. 8: is connected to the power supply and the range of voltage depends on the appliance need. MODES: After discussing above the different functions of 555 timers, let’s now discuss about its modes, its usage in different modes. 555 timers IC’s can be used as a multivibrator in three different forms they are as follow: Astable mode Monostable mode Bistable mode ASTABLE MODE: Astable means without a stable state. It has two unstable state means 0 and 1, in other words it continually switch it states to high and low creating a rectangular wave form on its output. There are numerous advantages of this circuit few of them in which it is used are flash lights, LED’S, and security alarm. FIG 2 (kpsec.freeuk.com/images/flashlcd.gif   FEB 10, 2011) FIG 3 (antonineeducation.co.uk/Electronics_AS/Electronics_Module_1/topic_11/topic_11__555_timer_circuit.htm   FEB 10, 2011) For the waveform above we can see how it changed from 0 to 1. For this circuit to become operational we need to consider some of the formulas ‘’The mark time [t(H] is the time at which the output is a 1. t(H)= 0.7(RA + RB)C The space time [t (L)] is the time at which the output is a 0. t(L) = 0.7 RBC The mark to space ratio = mark time à · space time. The astable period T is the time taken for one complete cycle, the mark and the space times added together.   T = mark + space = t(L) + t(H). The frequency = 1 à · period. f =  ____1.4_____ (R1 + 2R2)C The time t (H) will be longer than t (L), unless R1 is very small compared to R2.   If this is the case, then t (H) will be approximately equal to t (L), but not quite equal.   We can say to a first approximation that the mark to space ratio is 1.   This will result in a square wave output’’ ( antonine-education.co.uk/Electronics_AS/Electronics_Module_ 1/topic_11/topic_11__555_timer_circuit.htm FEB 10, 2011 MONOSTABLE MODE: Monostable means circuit which has only one stable state, normally it has two states means stable and unstable. When the voltage is not applied it remains in stable state but as the â€Å"trigger† is pressed it creates electric pulse and switches from stable state to unstable state and remains there for a limited time period which is set and after that it comes back to stable state. This type of circuit is ideal for â€Å"push to operate† system for a model displayed at exhibitions. A visitor push the button to start mechanism of choice and it automatically switch off after a set time. FIG 4 (antonineeducation.co.uk/Electronics_AS/Electronics_Module_1/topic_11/topic_11__555_timer_circuit.htm  Ã‚   FEB 11, 2011) The above diagram shows the circuit of monostable 555 timer. This circuit operates when the switch is closed and released, the voltage at Pin 2 goes up to down and then up. Due to this Pin 7 is discharged from zero and the voltage increases at output. When the voltage across the capacitor (C) gets two third then the output stop and it comes to stable state. The output of this circuit is shown in the FIG below. FIG 5 (antonineeducation.co.uk/Electronics_AS/Electronics_Module_1/topic_11/topic_11__555_timer_circuit.htm   FEB 11, 2011) BISTABLE MODE: Bistable has two stable states, in this mode 555 timer acts as a flip-flop. In this the trigger (which is Pin 2) and reset (which is Pin 4) both are at high state because of the resistors, while the threshold (which is Pin 6) is simply grounded. By taking the trigger LOW it switches to SET position and the output state changes to HIGH and by taking the RESET Pin LOW it switches to reset position and the output will remain LOW. TASK 1(B): A 555 timer is basically used in our daily life as a day/light alarm which can be useful for waking us up from our sleep. Fig 6 free-circuits.com/diagrams/n/14qwe.gif   (March 20, 2011) The components which are used in the above diagram are as follows: 1 Light Dependant Resistor (LDR) 1 transistor 2 set of capacitors both value of 0.01 ÃŽ ¼F 1 555 timer 1 diode 15v/1 µF 3 set of resistor range of 10k, 56k and 3.3 k respectively 1 100k variable resistor 1 speaker 8ohm, 0.5W OPERATION: This above circuit exclusively depends on the light for it to function. A 555 timer is used above and it works on a principle of astable mode with frequency of 1Khz. The transistor is set high because of the changeable resistor when light doesn’t fall on the LDR therefore causing the 555’s reset pin low. Just because of this the timer is reset. It resistance decrease when the light falls on LDR which in turn causes a decrease in base resistance of the transistor alloying current to flow. This will cause the reset pin on the 555 timer to increase and allows the timer to ‘oscillate’ and the speaker starts working by creating sound. TASK 2:  INTRODUCTION OF FET TRANSISTOR: The field effect transistor is a semiconductor device; it depends on its operation to control current by an electric field. FET’s are available in two basic forms and they are: Junction gate field effect transistor (JFET) Insulated gate field effect transistor (IGFET) But the most commonly used transistor is Metal-Oxide semiconductor field effect transistor (MOSFET). It is commonly used because it can be connected as resistor and capacitor, it is cheaper than Bipolar junction transistor (BJT) , it is much smaller in size and there power consumption is much smaller. CONSTRUCTION AND OPERATION OF FET Metal-Oxide semiconductor field effect transistor (MOSFET) is a type of semiconductor which uses three connections which are GATE, SOURCE and DRAIN. The effective width of the channel is controlled by a charge which is placed on gate electrode. The shape of a transistor is like a bar with P-type silicon and two strips which are doped to make N-type material when the metal is deposited to make two terminals DRAIN and SOURCE, then the surface is covered with silicon-oxide which is non-conductor. Then again metal is deposited to form one more terminal called gate which is shown in fig 1. interfacebus.com/JFET-N-Channel-symbol.png (March 20, 2011) After it is completed then the potential of (0V) is applied between the source and drain because of P-N junction there is no current flowing. The P-type material which is source terminal is at 0V, and the gate is already made positive so that it will repel the holes from P-type and turn it temporary N-type. This creates a channel joining two N-type strip so that current flow from drain. If the potential against gain terminal is greater, than the channel will become wider which ends with large current. So to conduct this type, positive voltage is applied to gate. circuitstoday.com/wp-content/uploads/2009/08/n-channel-de-mosfet-structure.jpg (March 20, 2011) Metal oxide semiconductor field effect transistor (MOSFET) is operated in two modes they are: Depletion mode Enhancement mode DEPLETION MODE: Regardless of weather a MOSFET is N-type or P-type material but there are still fundamental difference between depletion mode and enhancement mode. To form a thin layer of silicon-oxide along one side of the channel is easy, and then leave the metal gate region down over the insulator. The gate channel will act as a semiconductor resistance as there Is not current applied to it, P-N junction is not formed nor the depletion layer because the whole conduction of current depends upon the voltage applied between source and drain. If we apply sufficient voltage across source and drain the current will flow through the channel. When negative voltage is applied through the gate terminal it will repel electron charge away from the gate terminal. But as N-type contain majority electron charge carriers by repelling then away from gate the applied negative voltage will create a depletion region. So the process is called Depletion Mode Metal-Oxide Semiconductor Field Effect Transistor. THE ENHANCEMENT MODE MOSFET: Enhancement mode contains two N-type channel and one P-type channel which is sandwiched between both N-type as shown in fig 2. Applying the positive voltage to the drain terminal with respect to source terminal and applying positive terminal to gate terminal. As a result it will attract all the free electrons towards the gate. As the positive voltage is increased the electric field will also become wider and more electrons are attracted. There are free electrons in P-type, source junction is forward biased, so the positive gate voltage can attract electrons towards the gate. The electrons which are attracted towards the gate will enhance the channel within the P-type region as shown in fig 3. This will bridge the gap between source and the drain and it will start FIG 2  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚  Ã‚   FIG 3 COMAPRISON BETWEEN MOSFET AND BJT: Metal Oxide Semiconductor Transistor (MOSFET) It is semiconductor device having three active electrodes known as Gate, Source and Drain. Conduction takes place due to either holes or electrons. Hence it is a unipolar Transistor. It is voltage controlled device. Its operation depends upon the flow of majority carriers only. It has high input impedance. It is less noisy than tube or bipolar transistor. There are two type of FETs N-channel P-channel.   It is simpler to fabricate and occupies less space.   It has thermal stability. It can be used as voltage variable resistor. It has very fast switching time. Bipolar Junction Transistor (BJT) It is a semiconductor device consisting of three electrodes known as Base, Emitter and Collector. Conduction takes place due to holes and electrons. Hence it is a bipolar device. BJT is a current controlled device. It operation depend upon the flow of both majority and minority carriers. BJT has low input impedance. BJT device is noisy. There are two type of BJTs NPN and PNP. BJT is difficult to construct and occupies more space. BJT does not have thermal stability. BJT cannot be used as voltage variable resistor. ADVANTAGE OF MOSFET DEVICE: When compared to MOSFET, its switching time is slow Its switching time is 10 times greater than a bipolar junction It has very much switching current. It is less affected by temperature. DISADVANTAGE OF MOSFET DEVICE: It has very high resistance as compared to bipolar transistor. It can be destroyed by high voltage, especially static electricity.    USES OF MOSFETs: MOSFETs can also be used as voltage variable resistor. It is also used as an amplifier. It is also used to prevent power losses. It is used as a switch. It is used as a voltage control device. REFERENCES: Books: Owen Bishop (1995), Understand Electronics, Great Britain, Athenaeum Press Ltd. (electronics-tutorials.ws/waveforms/555_timer.html )feb 10, 2011 (kpsec.freeuk.com/images/flashlcd.gif   FEB 10, 2011) (antonineeducation.co.uk/Electronics_AS/Electronics_Module_1/topic_11/topic_11__555_timer_circuit.htm   FEB 10, 2011) ( antonine-education.co.uk/Electronics_AS/Electronics_Module_ 1/topic_11/topic_11__555_timer_circuit.htm FEB 10, 2011 (antonineeducation.co.uk/Electronics_AS/Electronics_Module_1/topic_11/topic_11__555_timer_circuit.htm  Ã‚   FEB 11, 2011) (antonineeducation.co.uk/Electronics_AS/Electronics_Module_1/topic_11/topic_11__555_timer_circuit.htm   FEB 11, 2011) free-circuits.com/diagrams/n/14qwe.gif   (March 20, 2011) interfacebus.com/JFET-N-Channel-symbol.png (March 20, 2011) circuitstoday.com/wp-content/uploads/2009/08/n-channel-de-mosfet-structure.jpg (March 20, 2011)

Habits and Traits of Beetles, Order Coleoptera

Habits and Traits of Beetles, Order Coleoptera Coleoptera means â€Å"sheath wings,† a reference to the hardened forewings which cover the insect’s body. Most people can easily recognize members of this order – the beetles. Beetles comprise nearly a quarter of all the described species on Earth. Over 350,000 species are known worldwide. The order is subdivided into four suborders, two of which are rarely observed. The suborder Adephaga includes ground beetles, tiger beetles, predacious diving beetles, and whirligigs. Water pennies, carrion beetles, fireflies, and the beloved lady beetles are all members of the larger suborder Polyphaga. Description Beetles have hardened forewings, called elytra, which protect the delicate hindwings folded beneath them. The elytra are held against the abdomen at rest, meeting in a straight line down the middle of the back. This symmetry characterizes most members of the order Coleoptera. In flight, a beetle holds the elytra out for balance and uses its membranous hindwings for movement. Beetles feeding habits are widely varied, but all have mouthparts adapted for chewing. Many beetles are herbivores, feeding on plants. The Japanese beetle, Popillia japonica, causes heavy damage in gardens and landscapes, leaving skeletonized leaves on the plants it devours. Bark beetles and borers can do considerable damage to mature trees. Predatory beetles attack other invertebrates in the soil or vegetation. Parasitic beetles may live on other insects or even mammals. A few beetles scavenge decaying organic matter or carrion. Dung beetles use manure as food and to shelter developing eggs. Habitat and Distribution Beetles are found worldwide, in virtually all terrestrial and aquatic habitats on Earth. Major Families and Superfamilies in the Order Carabidae – ground beetlesDytiscidae – predacious diving beetlesScarabaeidae – scarab beetlesElateroidea – fireflies and click beetlesCoccinellidae – lady beetlesTenebrionoidea – blister beetles and darkling beetles Families and Genera of Interest Bombardier beetles, genus Brachinus, spray hot quinines when threatened, with visible puffs of smoke.Cotalpa lanigera, the goldsmith beetle, starred in a short story by Edgar Allen Poe, The Gold Bug.Glowworms (family Phengodidae) are not worms at all - theyre beetles! Mature females retain their larval form, and glow between their body segments, appearing like a glowing worm.The invasion of the Asian Long-horned beetle, Anoplophora glabripennis, caused the preemptive removal of thousands of trees in New York and New Jersey. The beetle was introduced from Asia in 1996, arriving in wooden crates and pallets. Sources: Insects: Their Natural History and Diversity, Stephen A. MarshallKaufman Field Guide to Insects of North America, Eric R. Eaton, and Kenn KaufmanGarden Insects of North America, Whitney Cranshaw

German 1000 Essay Example | Topics and Well Written Essays - 500 words

German 1000 - Essay Example It is a good idea to have different monuments for the different groups. Although all the groups were victims of the Nazi, they were murdered for different reasons. As such, it was a good idea to have the monuments of the different groups separate. It is a good idea to have an underground place of information on the holocaust memorial. This information centre lists the names of the Jews who were killed in the holocaust. It is a good idea to have the names of the victims for commemoration purposes, educational and research purposes (Blumer 67). The name â€Å"memorial of the murdered Jews† singles out the Jews that were killed by the Nazi. It does not include the Jews who died of old age and diseases in the concentration camps. I think a better name for the memorial would be â€Å"a memorial for the holocaust victims†. We have a holocaust museum in the United States, but we do not have a single museum fir slavery or genocide in the country. I think this is because while the Americans did not perpetuate the killing of the Jews, they helped end it and that is why we have a holocaust museum. However, in the case of slavery, the United States perpetuated slave trade and does not have a slavery museum. I think Americans want to wash away this part of their history. There have also been numerous arguments that Africans were both the perpetrators and victims of slave

Contemporary Management Issues Essay Example | Topics and Well Written Essays - 750 words

Contemporary Management Issues - Essay Example This tendency is projected to aggravate over the next few years due to an expected mass retirement of most of Britain’s working class, leaving a small number in the job market. In decades to come, the number of people in the employment sector will be less than that of retirees. This interprets that the number of citizens of working age is set to be inversely comparative to that of retirees. This mass retirement, will result in limited workforce in both the private, and public sectors. The expected gap in the job market will negatively affect the economy, as the demand for commodities will be higher than the supply leading to anticipated inflation. The health sector will also feel the effect as most of the pensioners will be in need of more healthcare and social services. With the dwindling savings of these retirees and the limited savings of the few in the job market, the government will be forced to find alternative ways to fund the health and pension systems. As a result, ma ny people are inclined towards accumulating savings during their active years and dissimulating the same savings after retirement. This could lead to people selling their assets rather than buying, therefore, reducing asset value and increasing interest rates. In summary, the current demographical trend in the United Kingdom could lead to inflation, a reduction in personal savings, increased interest rates, capital accumulation and an overall strain in government expenditure. An analysis of the demographic changes in the United Kingdom shows that birth-rates and fertility have significantly reduced as compared to the 1970s. On the other hand, death rates have been consistently lower than live births. This has ensured a considerable population increase, a shift from the 1990s when British women were not giving birth. Although this is the trend now, the retirees continue to pose a threat to the British economy. With the ever increasing number of retirees, coupled with the upcoming gen eration and a small working group, the United Kingdom is headed for tough economic times. All these, will result, in a decline in economic growth in Britain, if corrective measures are not taken. Impact of the European Union on the global economy The world today has become progressively more interdependent in as far as economic growth is concerned. The European Union is at the fore front in promoting global economic systems. Member states to the European Union enjoy less restrictive trading laws and fair competition due to the increased elimination of trade barriers. The European Union is a global powerhouse in trade, which has been able to contend with the United States. As the world’s largest exporter, the European Union has continued to dominate the global economy. It exports high quality, first-class rated manufactured products. These include motor vehicles, chemicals and pharmaceuticals to nations outside this union. The United States and China are the leading destinatio ns for European Union’s exports, mainly machinery and transport gear. The European Union is the second largest importer after the United States and gets most of its products from member states. With the adoption of the euro as the medium of exchange, lifting of tariffs and the free movement of people within its quarters, trade has flourished. Due to this power held by the European union, other countries are more often than not, forced to give in to its demands. The European Uni